how to format seagate expansion drive for pc

#How to format seagate expansion drive for pc how to
#How to format seagate expansion drive for pc Pc
#How to format seagate expansion drive for pc windows

Click on OK to confirm and finish the formatting. Select FAT32 from the File system drop-down menu, and then tick the checkbox of Quick Format and click on Start. Right-click the partition on the DVR hard drive and select Format from the pop-up menu.

#How to format seagate expansion drive for pc Pc

Press Win + E keys to open the File Explorer and navigate to This PC from the left sidebar. To do so, you can follow the given steps below: The File Explorer is another commonly used tool to format hard drive. If there are more than one partitions on the hard drive, you need to repeat the above steps until all partitions are formatted to FAT32. Step 4. Click on OK to confirm this operation. After that, click on the OK button to save the change. Also, you can set the Volume label and Allocation unit size for the hard drive. Select FAT32 from the File System drop-down menu. Step 2. In the pop-up window, right-click the partition on the DVR hard drive and select the Format option from the submenu. Step 1. Press Win +R keys to open the Run dialog box, and then input diskmgmt.msc in the text box and hit Enter to access Disk Management.

#How to format seagate expansion drive for pc windows

Use Disk Managementĭisk Management is a Windows built-in partition manager that allows you to format a partition to FAT32 within 32GB. So, make sure that you have a backup beforehand. Note: Bear in mind that the formatting process will delete all data on the hard drive. If it is, you start formatting the disk by using the following ways. Now, you can turn on your computer and check if the DVR hard disk can be recognized by the system. Put back the side panel and close the computer case. Once you have connected the DVR disk to the computer, you can slide the drive tray back into the bay and reattach the screws. Then connect the power plug to the power socket at the back of the DVR hard drive, and connect the data cable into the data socket.

Pull out the power plug and data cable from the drive bay. Slide the DVR hard drive into an empty slot in the drive tray and make sure the connector side of the disk should be in the outward direction.

Then remove the screws from the sides of the drive bay and pull them out of the drive. Inside the computer case, remove the screws at the edge of an empty drive bay. Remove all the screws at the side panel of your computer using a screwdriver. Turn off your computer completely, and then unplug any peripherals and power cables. Then carefully follow the steps below to remove and connect the DVR hard drive to your PC. To do so, you need to prepare a Philips screwdriver beforehand.

#How to format seagate expansion drive for pc how to

How to Connect/Unlock DVR Hard Drive to ComputerĪnother important thing is to unlock hard drive for DVR. This is because some DVR hard drives support Windows, while some others support Linux. In addition, you need to choose the right DVR system that all security requirements can be fulfilled. On a macOS PC, you can format the DVR storage device to Refs. If you want to use the DVR hard drive on a Linux computer, then you need to format it to Ext4/3/2. So, you can format the DVR hard drive to NTFS if you want to store extra-large files.

But the biggest drawback is that you cannot store a single file larger than 4GB in FAT32. On a Windows PC, the FAT32 is the most used file system format since its universal compatibility. The format depends on your computer’s operating system. Read More What Format Does DVR Hard Drive Use